Courses

Isuzu used for Medium Rigid training

Isuzu 5 speed Synchromesh used for MR.

Medium Rigid (TLIC307C) MR Licence

Motor vehicle with a gross mass greater than 8 tonnes with two axles and may tow a single trailer not exceeding a gross mass of 9 tonnes. Must have held a C Class licence for at least 1 year.

Vehicle: Isuzu 5 speed synchromesh Gear Box.
Course: One on one training, one day course with test

$450.00: One day course with DPI Test
$85.00 per hour: One hour training session

Please allow 1 to 2 weeks for Test Booking to be made with DPI

Heavy Rigid (TLIC407D) HR Licence (unrestricted)

International Eagle used for the Heavy Rigid training

International Eagle used for HR (unrestricted).

Motor vehicle with a gross mass greater than 8 tonnes with three or more axles and may tow a single trailer not exceeding a gross mass of 9 tonnes. Must have held a C Class licence for at least 2 years and or a MR licence for 1 year.

Vehicle Either a Ford Aeromax , International Eagle ,International Transtar or a Kenworth T404 SAR  all with 18 speed road ranger gear boxes (non synchromesh).
Course: One on one training, two day course with test

$900.00: Two day course with DPI Test
$90.00 per hour: One hour training session

Please allow 1 to 2 weeks for Test Booking to be made with DPI

Heavy Rigid (TLIC407D) HR Licence (restricted)

Motor vehicle with a gross mass greater than 8 tonnes with three or more axles and may tow a single trailer not exceeding a gross mass of 9 tonnes. Must have held a C Class licence for at least 2 years and or a MR licence for 1 year.

Volvo Syncromesh used for HR (restricted)

Volvo Syncromesh used for HR (restricted).

Vehicle Volvo 12 speed synchromesh gear box.
Course: One on one training, one day course with test

$700.00: One day course with DPI Test
$90.00 per hour: One hour training session

Please allow 1 to 2 weeks for Test Booking to be made with DPI

Heavy Combination (TLIC507D) HC Licence

A prime mover with 3 axles and a gross mass greater than 15 tonnes, attached to a semi trailer with at least 2 axles. Must have held a C class licence for atleast 3 years and one year with a MR and or a HR licence.

Kenworth T404 SAR used for HC

Kenworth T404 SAR used for HR, HC & MC.

Vehicle: International Transtar ,Kenworth T404 SAR both with 18 speed road ranger gear boxes (non synchromesh) or a Volvo with a 12 speed synchromesh gear box coupled to a 41 foot drop deck trailer or a 40 foot pan.
Course: One on one training

The HC Assessment is conducted over two hours and consists of four parts:

  1. Conduct a pre-trip vehicle inspection
  2. On road assessment (The Drive)
  3. Conduct a mid-trip vehicle inspection
  4. Conduct a coupling & uncoupling (Unhook & Hookup)

$100.00 per hour: Two hour sessions recommended

Please allow 2 to 3 weeks for Test Booking to be made with DPI

Multiple Combination (TLIC607D) MC Licence

Volvo truck used for MC, HC & HR Licences

Volvo truck used for MC, HC & HR.

Keens Driver Training Bunbury provides Multi-Combination driver training & Assessments preparing all students for a modern transport industry.

Vehicle: International Transtar, Kenworth T404 SAR both with 18 speed road ranger gear boxes (non synchromesh) or a Volvo with a 12 speed synchromesh gear box coupled to a “B” double configuration or a 40 foot pan with pig trailer configuration to gain ring feeder experience.
Course: One day assessment with training provided as required depending on experience and competence level. Once competent, a certificate will be given which can then be submitted to the DPI to upgrade to a WA Multi-Combination Driver Licence.

$900.00: One day course with assessment (for experienced drivers)

$1400.00: Two day course with assessment  (for non-experienced drivers)
$110.00 per hour: One hour training session (Two hour sessions recommended)

Australian National Training Authority

Training Accreditation Council

Blue Card ( F1 )

How to follow Occupational Health and Safety procedures.

$150.00: Half day course

Forklift (TLID1007C)

Forklift used for all 1 day & 2 day courses

Forklift used for all 1 day & 2 day courses.

Accredited Worksafe Forklift Tickets includes Worksafe fee’s and 2 Passport Photo’s.

Forklift courses are done every Thursday in Bunbury and can be booked in other towns depending on numbers. All forklift courses are for experienced and non experienced/ beginner drivers.

$280.00 one day course (for experienced drivers)
$380.00 two day course (for inexperienced drivers)

Skid Steer (Bobcat) BCCPO3008B

$300.00 one day course (for experienced operators)
$500.00 two day course (for non-experienced operators)

Loader (FEL) BCCPO3004B

$400.00 one day course (for experienced operators)
$800.00 two day course (for non-experienced operators)

Please note: All courses can be tailor made to suit your requirements and group bookings are available your place or ours.

BOOKING LESSON’S

PLEASE NOTE : ALL LESSON’S MUST NOW BE PRE PAID.IF YOU NEED TO CANCEL YOUR LESSON OR CAN NOT MAKE IT WE WILL REQUIRE 24 HOURS NOTICE OR YOU WILL FORFEIT YOUR PAYMENT.

* All prices are correct as of 1st July 2009 and are subject to change without notice.

last updated 15/07/09